Oilon RE 35, Инструкция по установке и эксплуатации

Страница: 40 / 72

38 (67) RE01 1445EN
Cooling mode If you have a separate air conditioning unit, you can connect the
heat pump to it and use the button to change the heat pump’s
operation from heating to cooling.
By default, this button is not in use.
Reset
Use the button to acknowledge and reset possible error notifications
that appear on screen.
Occupancy Use the button of the remote controller to toggle between the
comfort setpoint and reduced setpoint. You can, for example, set
the heating mode to reduced setpoint when there is nobody home
for a long period of time.
Note that the button is active only when the heating mode is set to
automatic (time program). The selection stays active until the end of
the currently running time program.
Display icons
Heating to comfort setpoint Info level activated
Heating to reduced setpoint Programming activated
Heating to frost protection
setpoint
Heating temporarily switched
off; ECO function active
Process running, please wait Holiday program active
Heating circuit reference
A failure has occurred. Press
the
Information
button for
more information.
The heat pump control system
has detected the same failure
frequently. This icon is also
visible when the emergency
use is active.
Change remote control unit
batteries, displayed only on
remote control unit (optional).
The heat pump will operate
normally even if the batteries
run out of energy. The
batteries’ life is approximately
2 years.
4.2. Changing settings
Whenever you change the settings, always start from the basic display. See the
following figure.