Oilon RE 35, Инструкция по установке и эксплуатации

Страница: 39 / 72

RE01 1445EN 37 (67)
Domestic
hot water
When this function is on, the heat pump heats domestic hot water
automatically according to the defined settings. When the function
is off, the heat pump does not generate any domestic hot water.
Pressing and holding the button for five seconds or longer activates
forced charging. In forced charging the domestic hot water is
heated to its nominal setpoint even if the temperature of the
domestic hot water is not yet below the charging temperature.
Heating mode
Press the button to select a heating mode. A black bar is displayed
beneath the symbol of the selected heating mode. To toggle
between various modes, press the button repeatedly.
The heating modes are:
Cooling (not in use if cooling system is not configured)
Automatic mode
The heat pump switches heating between the comfort
setpoint and the reduced setpoint automatically
according to a time program.
Comfort setpoint
Reduced setpoint
Frost protection temperature
Information
Press the button to display the heat pump status and error
notifications on the display panel. You can browse through data and
notifications one item at a time by pressing the button again, or you
can turn the settings knob left or right to browse through the items.
Back/ESC
Use the button to exit settings or menus. If you have changed a
setting, but want to cancel the change, you can press Back/ESC to
exit the settings without saving any changes.
Settings knob Use the knob to browse through menus and to change settings.
You can turn the selection dial clockwise or anti-clockwise.
OK Press OK to enter a menu that you have selected or to commit
changes.