Oilon ESi 6-17, Инструкция по установке и эксплуатации

Страница: 56 / 80

Accessing adjustment settings for analog control
1. In the main view, tap on the menu button.
2. Select
Other settings
and
Extra heat settings.
3. In the Extra heat settings view, tap on the cogwheel button.
The Level sliders in the view each represent a separate power stage or heat source
(such as an electric immersion heater or oil-fired boiler). Use the sliders to set the
control voltage level for each power stage.
Analog adjustment control ver. 1
5.4.8 Temperature gauges
Use this view to enable and disable temperature sensors. By default, the outdoor
temperature sensor is enabled. The room temperature sensor is an optional accessory.
5.4.9 External alarm
This view is used to configure the settings for an external alarm signal that can be
connected to the heat pump.
External alarm ver. 1
The
Level
setting determines how the heat pump will respond to an external alarm
signal.
● If set to
Info
, an alarm will be generated and displayed in the user interface.
● If set to
Fatal
, the heat pump's compressors will not start.
You can connect the external signal to either input 17 or 18.
54 (75) M8010 2204EN