Oilon ESi 6-17, Инструкция по установке и эксплуатации

Страница: 7 / 80

1.2 Transportation
During lifting, do not walk or work under the heat pump or any other
suspended load.
Transport the heat pump in an upright position.
● If the heat pump needs to be tilted to pass through a doorway, do not tilt the unit
beyond 45°.
● If the heat pump needs to be tilted beyond 45°, detach the compressor unit.
Use a pallet jack or similar machine to transfer the heat pump. Lift the unit from the
bottom.
1.3 Product description
ESi, EMi, and ELi ground source heat pumps are especially suited for use as the
primary source of heating for new and renovated residential buildings and holiday
homes. To ensure trouble-free operation, each heat pump undergoes configuration,
testing, and a test run at the factory.
As E series heat pumps do not include a built-in storage tank, a separate storage tank
is required. The size and construction of the storage tank is selected based on the
application.
Type plate
The heat pump’s type plate is located under the heat pump’s top cover. The unit’s
serial code is marked on the type plate.
This product is CE-marked.
M8010 2204EN 5 (75)