- 12 -
５
-11
．
Installing the additional
“Nejikura” Screw hopper
We have, as an attachment, "Nejikura" which supplies a constant
amount of screws, automatically.
To use "Nejikura", take off the upper cover of the screw feeder
NSRI type and put on "Nejikura".
"Nejikura"
・
Detects, by sensor, the amount of screws in the scooping chamber
of the screw feeder.
・
Continues to supply screws automatically as the sensor detects
the amount of screws, in the scooping chamber, to be decreasing.
・
Two other "Nejikura", that fit the NSRI type, are the SR-80 Floor
type(Table-Top) and the T-510S Tower type.
・
If space above the screw feeder is limited, choose the SR-80
Floor type(Table-Top). If there's enough space above, choose the
T-510S Tower type.
To order, please contact your dealer.
The example for setting the
"Nejikura" SR-80 Floor type
T h e e x a m p l e f o r s e t t i n g t h e
"Nejikura" T-510S Tower type
