- 29 -
9-8
The scooping operation does
not stop though screws are at
the pick up site.
・
Readjust the timer knob.
9-9
The escaper operation does
not stop though screws are at
the pick up site.
・
The sensor does not detect a
screw.
・
The timer knob is not properly
adjusted.
・
Readjust the voltage of the
sensor.
9-11
The noise of the machine has
increased.
・
There is insufficient grease.
・
Apply grease to the transport
section.
○ Recommended grease:
BR2 Plus ,
Dow Corning Asia Co. Ltd.
9-10
A screw has fallen into the
machine.
・
Shake the screw down through
the hole at the bottom of the
machine.
Trouble
Cause
Corrective measures
