OHAUS Ranger Counting Scale, Руководство по эксплуатации

Страница: 55 / 71

1 7
In this section, each of the menus are described as to the settings and
application in the scale. Using the buttons previously described, you can
configure your scale to specific weighing needs. The menus, allow you
to change the settings and activate functions. Calibration menu is
covered separately in Section 5.
Section 4 - Setting up your scale
4.2 Setup menu
Function/Display Available Settings Application
Legal for trade
Graduation
Application
Back Light
List
End Settings
The Setup menu contains entries for LFT, calibration units, graduations,
processing, back light, list and end set. See table below for details.
Bold equals factory default settings.
Off
On
CAN
Legal for trade applications
when set ON or CAN.
0.001, 0.002, 0.005, 0.0001,
0.0002, 0.0005
This is the graduation size and
available options vary with the
capacity of the scale.
Stand -Standard
FILL-Filling
Regular weighing.
Dispensing for filling
applications.
On
Off
Back light can turned on or off.
Print
Allows printing of complete
setup menu.
End of setup menu, when
selected by pressing G/N/T
MENU button, display advances
to READ MENU.
4.1 Overview
Reset
res sp
Press G/N/T MENU =reset and
keep factory settings. Press
PRINT
UNITS =NO, advances to
next menu.
End of setup menu.
Calibration unit
Kg, lb Calibration may be set using
either kg or lb.