OHAUS Ranger Counting Scale, Руководство по эксплуатации

Страница: 51 / 71

1 3
In this section, you will learn how to work with the menu. The menu allows you to match your scale to your
specific weighing needs. In the menu, you can change the settings of your scale and activate functions. The
Main Menu contains 7 sub menus. Each of the seven sub menus are described in detail in the following
sections.
3.3 Menu operation
3.2 Switch functions
The button switches located on the front panel of the scale provide several functions. Please read the following
information before pressing any of these buttons.
ON/ZERO
OFF
G/N/T
MENU
TARE
PRINT
UNITS
BUTTONS PRIMARY FUNCTION SECONDARY FUNCTION
ON/ZERO Short press - Turns scale ON if OFF. When scale is ON, short press zeros the scale.
OFF Long press - Turns scale OFF if ON.
PRINT Short press - Sends PRINT command. When in MENU MODE: short press = NO .
UNITS Long press - Changes UNITS .
G/N/T Short presses - Gross/Net/Tare . When in MENU MODE: short press = YES .
MENU No action for 5 secs., scale returns NET .
Long press - Enter MENU .
TARE Short press - enter TARE .
How to enter the menus
To enter the menus, press and hold the G/N/T MENU button until CAL
appears. This is the first menu, CALIBRATION.
G/N/T
MENU
(Long press)
CALIBRATION SETUP READ RS232-1 RS232-2 LOCKOUT QUIT
A short press on the PRINT UNITS button = NO . When in MENU MODE
short presses will advance to the next menu as shown below. When
QUIT is reached, the next press on the PRINT UNITS button will return to
the CALIBRATION menu.
(Short press= NO)
How to select a specific menu
PRINT
UNITS