OHAUS Ranger Counting Scale, Руководство по эксплуатации

Страница: 20 / 71

2 0
3.10 Counting pieces out of a container
Put container full of parts on scale and press the Tare button.
Count out pieces equal to the sample size and press the Sample Size
button.
Number of pieces removed from the container are displayed as a nega-
tive number.
Auto optimization and ADD Mode are supported for “Counting Out”.
TARE
3.11 Automatic reference optimization
Automatic reference optimization results in more accurate counting on
piece counting duties. This function can be activated or deactivated in
the Setup menu. The factory default setting is ON.
Automatic reference optimization requires no action on the part of the
operator. The
Auto Opt symbol appears in the lower right hand side of
the display when this function is active.
Operation:
In order to optimize the calculated reference piece weight automatically, a
number of pieces less than or equal to the number of reference pieces
already on the pan are added to it. The message AUt OPt appears in the
display and automatic weight optimization is carried out. This process
can be repeated several times.
Pcs
1 1
%
Auto Opt
0
50 100
3.12 Add mode
Add mode ensures that the number of reference pieces used on piece
counting applications is not too small, which could produce inaccurate
results. This function is activated in the Setup menu. The factory default
setting is OFF.
If you have activated add mode and the number of pieces placed on the
pan is too small for accurate determination of the reference weight, you
are prompted to place more pieces on the scale (e.g. 2 pieces).
Place the stipulated number of pieces on the pan. The scale then deter-
mines the reference weight.
Pcs
NET
1 1
%
Auto Opt
0 50 100
Sample
Size
NET
1 1
%
Auto Opt
0 50 100