OHAUS Ranger Counting Scale, Руководство по эксплуатации

Страница: 16 / 71

1 6
In this section, you will learn how to work with the menu. The menu allows you to match your scale to your
specific weighing needs. In the menu, you can change the settings of your scale and activate functions. The
Main Menu contains 7 sub menus. Each of the seven sub menus are described in detail in the following
sections.
3.3 Menu operation
How to enter the menus
To enter the menus, press and hold the G/N/T MENU button until CAL
appears. This is the first menu, CALIBRATION.
G/N/T
MENU
How to enter an individual menu
A short press on the G/N/T MENU button = YES and you can enter a
specific menu.
(Long press)
G/N/T
MENU
(Short press=YES)
CALIBRATION SETUP READ RS232-1 RS232-2 LOCKOUT QUIT
How to enter an individual menu item
When in any menu, a short press on the G/N/T MENU button = YES and
you can enter a specific menu item. To advance through a given menu,
make short presses on the PRINT UNITS = NO button.
PRINT
UNITS
PRINT
UNITS
A short press on the PRINT UNITS button = NO . When in MENU MODE
short presses will advance to the next menu as shown above. When
QUIT is reached, the next press on the PRINT UNITS button will return to
the CALIBRATION menu.
(Short press= NO)
How to select a specific menu
G/N/T
MENU