OHAUS Ranger Counting Scale, Руководство по эксплуатации

Страница: 12 / 71

1 2
2.7 Connecting a second scale for piece counting
The RS connector(s) on the rear of the scale can also be used to connect
2 scales, together for a counting system. Use the scale - to - scale cable
listed in the accessory section.
Connect the cable between the scales.
The host scale (scale 1) must be a Ranger Count. In the RS menu of the
host ‘MODE’ should be set to:
REF 2 If remote scale is used for average
piece weight reference.
BULK 2 If remote scale will be the bulk counting
scale.
The remote Ranger Scale can be a Ranger Count or Ranger simple
weighing. The remote scale should be set to “DIALOG” in the Mode sub
menu.