EXPLORER BALANCES
EN-19
3.7.11 Weighing Units
The balance can be configured to measure in a variety of weighing units, including three (3) custom
units. Touch
Units
to choose from the displayed list.
(Scroll down to see all options.)
Note
: The active weighing Unit can also be accessed by touching the unit area of the Main Display
line; If a unit is not displayed in the list, it must first be turned on via the User Menu.
3.7.12 Preset Tare
To enter a Preset Tare, press the Icon and then enter a value;
enter 0 to clear the Preset Tare. The display will show the PT symbol and the tare value as a negative
number.
3.7.13 Calibration Test
is used to compare a known calibration weight against the last stored span calibration data.
3.7.14 Calculator
To use the built-in calculator application, touch
Calculator
. A four function calculator with addition,
subtraction, multiplication and division mathematical operations is available.
Perform a numeric operation using the keypad.
Press = to view the result.
To Clear the display: Press
CE
to clear the entry,
C
to clear
all
Touch
x
to close and return to the current Application.
Note
: Calculator is not available in software version 1.10.
3.7.15 Stopwatch
To use the built-in stopwatch application, touch
Stopwatch
. A countdown timer with interval (lap)
timer is available.
Press Start to begin using the Stopwatch timer.
Press Reset to reset the timer to Zero.
Touch Close to close and return to the current Application.
3.7.16 Logout
Used for User logout and return to User Login screen. This feature is only active if a user profile has
been created and a User has logged in.
