OHAUS Defender i-DT61PW, Инструкция по эксплуатации

Страница: 42 / 68

EN-40
Defender 6000 Indicators
5203 Scale ID
5204 User ID
5205 User Name
5206 Transaction ID
5300 Mode
5301 Information
5302 Target
5400 Alibi ID
5401 Input Status
5402 Output Status
5403 SN
5900 NewLine
5901 End
Note:
For ScaleMate's other functions, please contact an authorized dealer to obtain the software's
instruction.
4.7.3 RS485 Configuration
Please refer to RS485 Configuration in the
Defender

6000 RS232/RS485/USB Interface Instruction Manua
l.
4.7.4 Ethernet Configuration
Please refer to Configuration in the
Defender

6000 Ethernet Interface Instruction Manual
.
4.7.5 Analog Configuration
Please refer to Analog Configuration in the Defender

6000 Analog Kit Instruction Manual.
4.8 Memory
The Memory menu is different for i-DT61PW and i-DT61XWE. Please check the following sections for details.
4.8.1 Memory menu
(for
i-DT61PW model)
Status
[
StatUs
]
To enable or disable the memory function.
OFF
= to disable memory function.
ON
= to enable memory function. Press the
Print
button to save weighing data.
Export
[
EHPort
]
To export weighing data.
NO
= to export weighing data function is disabled.
Yes
= to export weighing data function is enabled.
Delete
[
dELEtE
]
To delete weighing data.
NO
= to not delete weighing data
Yes
= to delete weighing data
4.8.2 USB memory
(for
i-DT61XWE model)
USB memory is used to store the weight readings for future reference. By connecting a USB flash drive to the
scale the weight readings can now be stored directly on the USB flash drive.
Note:
this menu is only visible after a USB flash drive is detected.
The data will be stored in the flash drive in the following location:
\SYSTEM\DATA
A new file will be created monthly (one txt file stores a whole month’s output data…). The name of the txt file
will be year plus month.TXT. For example, the name of the txt file for 2020.6 will be
202006.TXT
.