OHAUS Defender i-DT61PW, Инструкция по эксплуатации

Страница: 39 / 68

Defender 6000 Indicators EN-37
Parity
[
PArItY
]
Set the data bits and parity.
7 EVEN
= 7 data bits, even parity
7 ODD
= 7 data bits, odd parity
7 NONE
= 7 data bits, no parity
8 NONE
= 8 data bits, no parity
Stop bit
[
StOP
]
Set the number of stop bits.
1 = 1 stop bits
2 = 2 stop bits
Handshake
[
H.SHAKE
]
Set the flow control method. Hardware handshaking is only available for COM1 menu.
NONE
= no handshaking
ONOFF
= XON/XOFF software handshaking
Alternate Print command
[
Alt.P
]
Set the alternate command character for Print.
Settings of A (a) to Z (z) are available. The default setting is P .
Alternate Tare command
[
Alt.t
]
Set the alternate command character for Tare.
Settings of A(a) to Z(z) are available. The default setting is T .
Alternate Zero command
[
Alt.z
]
Set the alternate command character for Zero.
Settings of A (a) to Z (z) are available. The default setting is Z .
End
[ End ]
Advance to the next menu or return to the top of the current menu.
4.7.2 Print Menu
Enter this menu to set printing parameters. Default settings are bold .
Menu Sub-Menu
Sub-
Menu (in
segment)
Options
Options (in
segment)
Print
(
P.r.I.N.t.I )/
2nd Print
( P.r.I.N.t.2 )
Assignment
ASSIGN
Demand
, Auto On Stable,
Auto On Accept,
Interval(seconds), MT-
Continuous, OH-
Continuous, SICS
DemMaN , ON.Stab ,
ON.ACep , INter ,
mMt.CON , OH.CON ,
SICS
Stable Weight Only
[Demand]
Stable
Off , On(LFT Force On)
OFF , ON
Mode
[Auto On Stable]
mMODE
Load , Load and Zero
LOAD
,
LOAD,;2r
Time
[Interval (seconds)]
tImME
1 ~50000
/
Checksum
[MT-Continuous]
C.SUmM
On, Off
ON , OFF
Template
tEmMp
Simple
, Custom 1, Custom
2, Custom 3, Custom 4,
Custom 5
SImMp , CUst1 ,
CUst2 , CUst3 ,
CUst4 , CUst5
Reset reset \
/
End End \
/