51
MENUS
PRINT MENU
RESET
YES/NO
COMMUNICATION
Baud
300, 1200, 2400,
4800, 9600
Data Bits
7 or 8
Parity Bit
Odd, Even, None,
1, 0
Stop Bits
1 or 2
End, Comm.
GLP
ID #
Project #
End,GLP
PRINT MENU
The Print menu provides a number of options which includes: reset, communications, good
laboratory practices, print options, and list.
Reset sets all submenus contained in the Print
menu to factory default settings.
Communication specifies baud rate, number of data bits,
parity bit type and stop bits.
GLP Good laboratory practices permits the entering of your own
identification number and project number which shows up on printing.
Print Options Enables/
disables Auto print feature, specifies time interval for automatic output of displayed data and/
or exclude a range of weights from being output. The following items can be turned on or off:
Stable data-only feature, numeric only or full display data for output, time and date. Items
shown in bold type are default settings. Items shown in italics in the print menu below appear
only if the appropriate Functions are turned on.
Print Menu Protection
The Print menu may be locked out to prevent unauthorized personnel from changing
settings. If SAFE is displayed, the Print menu has been locked out. Settings may be viewed
but not changed. To lock out the Print menu or unlock, refer to the section titled Menu Lock-
Out Protection.
PRINT OPTIONS
Auto Print
Cont, interval,
on stb,off
Initialize Auto Print
Interval, non print lo,
non print hi
Stable Data
ON/OFF
Numeric Data
ON/OFF
Time
ON/OFF
Date
ON/OFF
Reference
ON/OFF
End, Print Options
LIST
END, PRINT
Menu
Menu
