43
MENUS
Parts Counting Error
Parts counting Error is enabled only when the
Parts Counting Function is selected.
The parts counting error level is the level of
accuracy you consider acceptable for parts
counting results. The adjacent table lists error
levels that you can choose from. The default
setting is shown in bold type.
EXAMPLE: With 5 Pct selected, 100 parts on
the platform may yield a displayed count from
95 to 105 parts.
ERROR LEVELS
OFF
Disables error level limits.
.1 %
±0.1% acceptable error.
.25 %
±0.25% acceptable error.
.5 %
±0.5% acceptable error.
1 %
±1.0% acceptable error.
2.5 %
±2.5% acceptable error.
5 %
±5.0% acceptable error.
Check Weighing Options
Check Weighing is enabled only when the Check Weighing Function is selected. This feature
may be used for check weighing or package weight control in any one of the available
weighing units. When in use, the display will show the relationship between the load on the
pan, and the selected target weight. The bar graph will visibly display where the weight of
the load falls in relationship to the under, acceptable, and over limits. The balance also
displays UNDER, ACCEPT, and OVER messages as appropriate. The default settings are:
Reference = Reference weight, Display = normal.
Two choices are provided for programming the Reference Weight. One choice is the use of
a mass (package, container, etc,) and the other is a number which can be entered as a high
and low limit.
Three choices are provided for programming the display: normal, none, and sign. Sample
displays are shown on the next page.
To view, change or disable the PC Error Level:
1. Access the
submenu under the Setup Option submenu.
2.
ON
TARE
indicates percentage of acceptable error. Settings
are shown in table.
3.
MODE
• • •
to change the
percentage error limits,
4.
ON
TARE
when the desired setting is reached.
5.
MODE
.
6.
ON
TARE
.
PC
%
PC
%
%
SETUP
pC eRR
seT .1
seT .1
seT 5
pC eRR
eND
opT ION5
Menu
Menu
