4
INSTALLATION
Leveling the Balance
The balance is equipped with a level indicator on
the floor of the weighing chamber and two
adjustable leveling feet at the rear. Adjust the
leveling feet until the bubble appears in the
center circle of the level indicator.
Level
Indicator
Leveling
Feet
Installing the Pan Assembly
1.
Place the shield onto the keyed bushing
and press it down into place. The bent tabs
must be facing upward and the shield should
be flat against the chamber floor.
2.
Place the ring over the shield. The lip on the
bottom of the ring should fit against the
shield to keep it from moving.
3.
Insert the pan in the load receiver hole,
matching the key on the pan shaft with the
slot in the hole. Gently press the pan down
into place.
Ring
Pan
Keyed
Bushing
Shield
In-Service Cover
Place the cover snugly over the display unit.
Menu
Menu
