29
To achieve this function set the following parameters in the setup menu.
To achieve this function set the following parameters in the setup menu.
Auto-Tuning is performed at 150 °C for this new oven.
Auto-Tuning is performed at 150 °C for this new oven.
INPT=K_TC
UNIT= °C
DP=1_DP
OUT1=REVR
O1TY=RELY
CYC1=18.0
O1FT=BPLS
OUT2=TIMR
O2FT=ON
INPT=K_TC
UNIT= °C
DP=1_DP
OUT1=REVR
O1TY=RELY
CYC1=18.0
O1FT=BPLS
OUT2=TIMR
O2FT=ON
Figure 4.1
Heat Control
Example
Figure 4.1
Heat Control
Example
Main
Supply
Main
Supply
ON
OFF
Timer ( ALM )
Timer ( ALM )
Heater
T/C
Oven
6
4
3
OUT1
Set
SP1=150.0
SP2 =30.0
SP1=150.0
SP2 =30.0
4-1 Heat Only Control with Dwell Timer
4-1 Heat Only Control with Dwell Timer
An oven is designed to dry products at 150 degrees C for 30 minutes and then stay unpowered until the next batch
is ready for baking. An
equipped with a dwell timer is used for this purpose. A single phase system
diagram is shown as follows :
ETR-3000
An oven is designed to dry products at 150 degrees C for 30 minutes and then stay unpowered until the next batch
is ready for baking. An
equipped with a dwell timer is used for this purpose. A single phase system
diagram is shown as follows :
ETR-3000
Chapter 4 Applications
Chapter 4 Applications
C
9
10
5
E T R - 3 0 0 0
O1
O2
C
