manualshive.com logo in svg

OfiTE 900, Инструкция по эксплуатации, Страница: 57 / 58

Поделиться
Скачать
OfiTE 900 Скачать руководство пользователя страница 57

Patent No. 6,766,028 - OFI Testing Equipment, Inc.

OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com

56

Appendix

Grounding

Proper grounding protects the equipment operator from the risk of electric 

shock. The electrical cord provided with this equipment has an equipment 

grounding conductor and a grounding plug. Observe the following guidelines 

at all times:

-  Always connect the plug to a matching outlet that is properly installed and 

grounded.

-  If an extension cord is necessary, make sure it has three prongs and is 

compatible with the electrical cord provided with the equipment.

-  Do not modify the electrical cord provided with the equipment. If it is not 

compatible with any available outlets, have a compatible outlet installed 

by a qualified electrician.

-  If the equipment-grounding conductor (solid green or green and yellow) 

is improperly connected, the operator will be at risk of electrical shock. 

Never connect it to a live terminal.

-  Local codes may require a Ground Fault Interrupt Circuit (GFIC).

-  Repair or replace a damaged or worn cord immediately.

-  When in doubt, consult a qualified electrician

Содержание 900



























































Отзывы:

Нет отзывов