Patent No. 6,766,028 - OFI Testing Equipment, Inc.
OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com
22
9)
100 RPM
10)
60 RPM
11)
30 RPM
12)
6 RPM
13)
3 RPM
14)
10 second Gel (Wait 10 seconds)
15)
10 minute Gel (Wait 10 minutes)
b. After the completion of the test, results are displayed as follows.
Clicking
NEXT
allows you to proceed to the next set of readings.
1)
“Up Readings”
for all the test speeds
2)
“Down Readings”
for all the test speeds
3)
“Avg Readings”
for all the test speeds
4)
“Gels & Temp”
1.
10 Sec =
2.
10 Min =
3.
Temp =
9. In addition to the pre-installed programs (MUD and CEM), the OFITE
Model 900 contains 8 slots for custom programs created with the
ORCADA
®
Software. Refer to page 35 for instructions on creating
custom programs. To access these custom programs:
a. Press the
SET UP
key twice.
At this point you can press the
ENTER
key to recall the results of the
last test run.
b. Press the
SET UP
key again to select a new test to run.
c. Select a test by pressing the numeric key corresponding to the test
you wish to run. The test will start immediately.
d. When the test is complete, the unit will beep.
e. Press the
NEXT
key to page through the test results.
f. Press the
CLEAR/STOP
key to return to the main menu.