Officine Gullo WND 040, Инструкция по установке и эксплуатации

Страница: 37 / 96

32
2
Caution hot surface (fig.1)
- During the operation of the machine the
area indicated by the label may reach harmful
temperatures if it comes in contact with a person,
please do not touch this area for a minimum of 10
minutes after switching off the machine to allow
this surface to cool within acceptable temperature
ranges.
Attenzione temperatura elevata
Attention température élevée
Warning hot temperature
fig. 1
Turn off the dispenser using the power switch to O (off) position,
unplug the power cord and turn off all electrical devices that can harm
people.
• Use all means necessary to inform the people in your surroundings
for their safety.
• If any parts are worn they should be replaced, please use only
original spare parts.
• Do not to change the characteristics of service and safety devices
and always use original spare parts.
Avoid using materials not authorized by the manufacturer.
8.11 Installation and replacement of argon
cylinders
(models with internal cylinder)
3
Serial of the machine, power supply voltage and the
rating of the fuses
►
→
chap.2
Manual of Use
33
1.
Make sure the machine is turned off.
2.
Unscrew and remove the cap on top
of the dispenser which holds and protects
the cylinder from damage.
N
2
A
B
N
2
A
B
N
2
A
B
3. Attach the cap to the new cylinder
(A)
and insert the cylinder into its seat.
Screw
the cap counterclockwise (B)
with the gas
cylinder and make sure the supply is properly
tightened and there are no leaks.
4.
Tighten to close the cap on top of the
dispenser.
T he valve is reverse-threaded, rotate
counterclockwise to screw and
clockwise to unscrew.
►
→
The cylinder CANNOT BE RECHARGED!
►
→
Only cylinders issued by Wineemotion spa can be
used because the means of attachment is customized.
►
→
37
Officine Gullo