Officine Gullo WND 040, Инструкция по установке и эксплуатации

Страница: 16 / 96

12
6.1 General Safety Warnings
• The manufacturer, in the design and manufacture of regulators, is to
foresee and avoid risks to your health. The manufacturer realizes in full
compliance with the laws and materials at its disposal the know-how
in the design and implementation of the distributor. This information
warns users about possible risk behavior and how to avoid them. Ho-
wever, the precautionary information is essential and mandatory. The
safety also depends on the users.
Before turning on the dispenser for the first time is strongly recom-
mended to read this manual to fully understand the contents, espe-
cially the safety instructions.
• Taking some time to read and understand the contents of this ma-
nual will help you avoid hazardous conditions and abnormal behavior.
It would be too late to do what should have been done in case of an
accident.
• When lifting, follow the instructions for movement of the dispenser
on the packaging and in the manuals supplied.
• Pay attention to the symbols on the labels, shapes and colors refer to
important safety notices. Maintaing in good condition.
• Only persons who have read and understood the contents of the ma-
nual are allowed to use the dispenser.
• The dispenser must be installed in a dry environment provided suffi-
cient flow of 'fresh air according to the manufacturer's specifications.
Environment Data
Ambient temperature Duty ° C 15 ÷ 27
Maximum relative humidity (Rhu) 70% Table 1: Technical data Dispen-
sers
Description Unit Value
• The dispenser must be used according to the intended purpose only.
Improper use or misuse can lead to conditions of risk and economic
damage.
6. Safety information
Officine Gullo 16