94
Mod.
SG69 - 99
Forno a gas
Gas oven
Four à gaz
Gasofen
Horno a gas
MANUALE D'USO E MANUTENZIONE
OPERATING AND SERVICE MANUAL
MODE D’EMPLOI ET D’ENTRETIEN
BEDIENUNGS- UND WARTUNGSHANDBUCH
MANUAL DE USO Y MANTENIMIENTO
I
GB
D
F
SOSTITUZIONE COMPONENTI ELETTRICI
Tolto il fianco destro (A - Fig. 37) ed il cruscotto comandi (B) (viti a vista), si accede facilmente
a tutti i componenti.
SOSTITUZIONE VETRO PORTA
1) Attendere che il forno si raffreddi completamente.
2) Togliere le maniglie dei forni (C - Fig. 37) svitando le viti (H).
3) Svitare i volantini (D) che fissano i copriporta al telaio porta.
4) Sfilare i copriporta superiore (E) avendo cura di non danneggiare l’isolante interno alla porta.
5) Sostituire il vetro (F) eliminando eventuali pezzi residui.
REMPLACEMENT ELEMENTS ELECTRIQUES
Une fois le côté droit retiré (A - Fig. 37) et le tableau de commande (B) (vis visibles), on
accède aisément à tous les éléments.
REMPLACEMENT VITRE PORTE
1) Attendre que le four soit complètement refroidi.
2) Enlever les poignées des fours (C - Fig. 37) en dévissant les vis (H).
3) Dévisser les volants (D) qui fixent les couvre-portes au cadre de la porte.
4) Retirer les couvre-portes supérieurs (E) en prenant garde de ne pas abîmer l’isolant inter-
ne de la porte.
5) Remplacer la vitre (F) en éliminant les petits résidus éventuels.
AUSWECHSELN DER ELEKTRISCHEN KOMPONENTEN
Nachdem das rechte Seitenteil (A - Abb. 37) und die Armaturentafel (B) (sichtbar angebrachte
Schrauben) entfernt wurden, erhält man problemlosen Zugang zu allen Komponenten.
AUSWECHSELN DES TÜRGLASES
1) Warten, bis der Ofen vollständig abgekühlt ist.
2) Die Griffe der Öfen (C - Abb. 37) durch Abschrauben der Schrauben (H) abnehmen.
3) Die Handräder (D) die die Türabdeckung am Türrahmen befestigen, aufschrauben.
4) Die obere Türabdeckung (E) herausziehen und dabei darauf achten, das innen an der
Tür befindliche Isoliermaterial nicht zu beschädigen.
5) Das Glas (F) auswechseln, wobei eventuelle Reststücke beseitigt werden.
REPLACING ELECTRICAL COMPONENTS
Once the right side (A - Fig. 37) and the control panel (B) have been removed (screws in full
view), it will be easy to get to all components.
DOOR GLASS REPLACEMENT
1) Wait until the oven has cooled down.
2) Remove the oven handles (C - Fig. 37) by undoing the screws (H).
3) Unscrew the handwheels (D) fixing the door covers to the frame.
4) Remove the upper door covers (E), taking care not to damage the door insulation on
the inside.
5) Replace the glass (F), getting rid of any residues.
Содержание SG 69
Страница 110: ......