Maintenance Section
ODB COMP
ODB COMP
ODB COMP
ODB COMP
ODB COMPANY
ANY
ANY
ANY
ANY
800-446-9823
Lubrication Points, continued;
Hydrauilc Hoist Fittings (figure 4.3g):
Raise
and support the dump body as detailed in section
3.2. Lubricate the fittings at least every 200 hours of
operation with a #2 high grade grease. There are
tremendous forces on the bearing sufaces within the
hoist frame. It pays to be generous with the grease
gun, to insure proper operation and long life.
Hoist Hinge and Body Prop(s) Fittings (figure
4.3h):
Each hinge pivot has a grease fitting that needs
lubrciating every 200 hours. The body prop(s) has a
fitting at the pivot area as shown in figure 4.3h.
Figure 4.3g
8.
9.
4.3 LUBRICATION, continued;
Figure 4.3h
Figure 4.3f
Never go under the dump body unless the body is
empty and the body prop(s) is in the proper posi-
tion.
The body prop is designed and intended to sup-
port an EMPTY truck body in the raised position.
Unload the body before using the body prop(s).
