manualshive.com logo in svg

ODB SCL800SM-3X, Руководство пользователя

Поделиться
Скачать
ODB SCL800SM-3X Скачать руководство пользователя страница 21

Pre-Operating Section

2.5 PERSONAL PROTECTIVE EQUIPMENT AND CLOTHING

IMPORTANT CHECKS:

Anyone operating ODB’s leaf vacuums 

MUST

 wear appropriate

protective equipment and clothing to protect them from injury during
operations.

1.

2.

3.

4.

5.

6.

7.

Head Protection:

  Hard hats without under-chin strapping.

Eye Protection:

 Wraparound goggle type eye protection held in

place with an elastic band around the head or a hard hat
mounted face shield, which provides full protection of the face.
Eye protection must meet ANSI Z87.1 standards.

Hearing Protection:

  plug type or “muff type” ear protection

should be worn at all times while operating the unit.

Breathing Protection:

  Paper filter type dust masks should be

worn to protect from dirt and dust particles during the vacuuming
process.

Reflective Vests:

 Highly visible vests should be worn so motor-

ists  can see see the operator in all weather and lighting condi-
tions.

Work Gloves:

 Gloves should be worn to protect the hands and

wrists from debris.

Steel Toed Boots:

  should be worn to protect the feet.

Work clothes MUST be close fitting, but not restrictive of move-
ment, without any loose parts that could be entangled in any parts
of the leaf vacuum.   This includes items such as jewelry, chains
and backpacks.

PROTECTIVE EQUIPMENT:

Always wear proper safety equipment as outlined below, not wear-
ing such equipment CAN result in serious personal injury or pos-
sible death.

ODB COMP

ODB COMP

ODB COMP

ODB COMP

ODB COMPANY

ANY

ANY

ANY

ANY

Manufactured by

Содержание SCL800SM-3X




















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды