42
“NO HR” is displayed
when doing heart rate
controlled programs
and grasping the
contact heart rate
sensors
•
Grasp each contact heart rate grip sensor so the contact sensor portion of the grip
rests in the palm of your hand.
•
Grip the contact sensors firmly and keep your hands steady and in place.
•
Have someone else try the grips to see if it works for him/her.
•
If “NO HR” is still displayed, contact your local dealer for service
.
Heart rate readout
seems inaccurate (too
high or too low)
Chest strap
•
There may be interference with another electrical product (lights, TV, personal stereo,
wireless network, MP3 players, phones, etc.). Turn off any other electrical product to
see if there is interference.
•
Put water between your skin and the ribbed electrodes on the back of the chest strap.
This can improve the electrical connection.
•
Another person in the same workout area may be wearing a chest strap. Have the
person relocate to a distance of 3-4 feet away if possible.
•
The chest strap may be too loose. Adjust the elastic strap so that the strap is snug
against your body.
•
Have someone else try the transmitter to see if the reading seems accurate for him/
her.
Contact heart rate sensors
•
Make sure you are grasping the grips firmly and steadily.
•
Have someone else try the grips to see if the reading seems accurate for him/her.
•
If the issue persists, contact your local dealer for service.
Console blinks on / off
•
Check the power cord connections. Make sure the connections are secure from the
transformer into the machine base and the wall outlet.
•
Console connections could potentially be faulty. See assembly instructions to check
connections.
•
If the issue persists, contact your local dealer for service.
Machine enters pause
mode after a short
period
•
This is most likely a speed sensor issue; contact your local dealer for service.
LED lights are always
on
•
Press and hold the Pause Clear button for five seconds to enter sleep mode.
LED display is always
toggling
•
Press the Enter button to stop the LED screen from toggling.
Console LEDs are not
bright enough
•
Enter User Set-up, by pressing and holding the Level
(
/
) keys for three seconds.
•
Press any (
/
) key until “BRIT” displays in the matrix window.
•
Press Enter until the LEDs are set at the desired brightness.
•
Press any (
/
) key until “EXIT” displays in the matrix window, then press Enter.
•
If the brightness is set to “8” (the brightest level) and the LEDs are still dim, contact
your local dealer for service.
Unable to activate
Movement
Management (MOM)
Mode
•
Check to see that MOM mode is enabled. Enter User Set-up by pressing and holding
the Level (
/
) keys for three seconds.
•
Press any (
/
) key until “MOM” displays in the matrix window.
•
Press Enter until “On” is displayed.
•
Press any (
/
) key until “EXIT” displays in the matrix window, then press Enter.
•
Press and hold the Program (
/
)keys for three seconds to activate MOM mode.
