Oceanic Proplus 4.0, Руководство по эксплуатации

Страница: 6 / 50

6
PROPLUS 4.0 OPERATING MANUAL
© Pelagic, 2019 Doc. No. 12-5669-r01 (1/18/19)
BASICS
The ProPlus 4.0 is an easy to use dive computer utilizing a two button interface. Divers may choose between either Dive or Gauge Mode. Though
the ProPlus 4.0 is easy to use, you will get the most out of your new ProPlus 4.0 if you take some time to familiarize yourself with its displays and
operation. Information has been organized into easy to follow sections to aid you in learning all you need to know. There is also a glossary at the
end of this guide for any terms that may sound unfamiliar to you.
ACTIVATION
To activate the ProPlus 4.0, press and release either button. The ProPlus 4.0 will also turn on if its metal contacts become wet and you descend
greater than 1.5 m (5 ft) for 5 seconds. The H2O ACT (water activation) feature may be disabled if that is your preference. Disabling the H2O ACT
feature is described in the Dive Surface Mode chapter, p. 26 .
• Upon activation the unit will enter a Diagnostic Mode. The ProPlus 4.0 checks the display and voltage at this time to ensure that everything is
within tolerance.
• It will also check ambient barometric pressure, and calibrate present depth as 0 ft (m). When at 3001 ft (916 m), or higher, it will adjust depth for
the higher altitude.
• After the Diagnostic check, the ProPlus 4.0 will display the surface screen in Dive Mode.
NOTE: The ProPlus 4.0 has no off button or command. If no buttons are pressed or dives made within 10 minutes the computer
will enter Sleep Mode. The screen and Bluetooth (if set ON) shut down, to save battery life, while in Sleep Mode. To wake the
computer press any button. Additionally, the unit will completely shut itself off after 2 hours of inoperation. However, the ProPlus
4.0 will stay on, in Sleep Mode, for a 24 hour period after the dive, counting down FLY (time to fly) and SAT (desaturation time) if
a dive has been made.