Oceanic Proplus 4.0, Руководство по эксплуатации

Страница: 40 / 50

40
PROPLUS 4.0 OPERATING MANUAL
© Pelagic, 2019 Doc. No. 12-5669-r01 (1/18/19)
UPLOADING/DOWNLOADING DATA
As previously described (page 26), the ProPlus 4.0 can be paired using the Bluetooth® feature. This requires a mobile device with Bluetooth® run-
ning D software.
The Settings Upload portion of the program can be used to set/change the Gases, Set Alarms, Set Utilities, and Set Time using the same Interface
System. The Mode settings must be entered using the ProPlus 4.0 button controls.
Information available for retrieval (download) from the ProPlus 4.0 includes items such as dive number, surface interval time, depth, dive time, start
dates/time, lowest temperature, sampling rate, set points, Tissue Loading Bar Graph, and Ascent Rate Bar Graph.
Refer to the D software application for further instruction on linking your ProPlus 4.0 to your mobile device.
CARE AND CLEANING
Protect your ProPlus 4.0 from shock, excessive temperatures, exposure to chemicals, and tampering. Protect the lens against scratches with an Instru-
ment Lens Protector. Small scratches will naturally disappear underwater.
• Soak and rinse the ProPlus 4.0 in fresh water at the end of each day of diving, and check to ensure that the areas around the Low Pressure
(Depth) Sensor , water contacts, and buttons are free of debris or obstructions.
• To dissolve salt crystals, use lukewarm water or a slightly acidic bath (50% white vinegar/50% fresh water). After removal from the bath, place
the ProPlus 4.0 under gently running fresh water. Towel dry before storing.
• Keep your ProPlus 4.0 cool, dry, and protected during transport.
INSPECTIONS AND SERVICE
Your ProPlus 4.0 should be inspected annually by an Authorized Oceanic Dealer who will perform a factory prescribed function check and inspec-
tion for damage or wear. To keep the 2 year limited warranty in effect, this inspection must be completed one year after purchase (+/- 30 days).
Oceanic recommends that you continue to have an inspection performed every year to ensure it is working properly. The costs of annual inspections,
or inspections relating to water tight integrity, are not covered under the terms of the 2 year limited warranty.
To Obtain Service:
Take your ProPlus 4.0 to an Authorized Oceanic Dealer or send it to the nearest Oceanic Regional Facility.
To return your ProPlus 4.0 to Oceanic:
• Record all dive data in the Log and/or download the data stored in memory. All data will be erased during factory service.
• Package it using a protective cushioning material.
• Include a legible note stating the specific reason for return, your name, address, daytime phone number, serial number(s), and a copy of your
original sales receipt and Warranty Registration Card.
• Send freight prepaid and insured using a traceable method to the nearest Oceanic Regional Facility, or to Oceanic USA.
• If shipping to Oceanic USA, obtain an RA (Return Authorization) number by contacting Oceanic at 888-270-8595 or followthe instructions at
https://www.oceanicworldwide.com/us/support/returns/.
• Non-warranty service must be prepaid. COD is not accepted.
• Additional information is available at the Oceanic web site OceanicWorldwide.com
BATTERY REPLACEMENT
CAUTION: The procedures that follow must be closely adhered to. Damage due to improper Battery replacement is not covered
by the unit's 2 year warranty.
The Battery Compartment should only be opened in a dry and clean environment with extreme care taken to prevent the en-trance of moisture or
dust.
As an additional precautionary measure to prevent formation of moisture in the Battery Compartment, it is recommended that the Battery be
changed in an environment equivalent to the local outdoor temperature and humidity (e.g., do not change the Battery in an air conditioned environ-
ment then take it outside during a hot sunny day).
Inspect the Buttons, Lens, and Housing to ensure they are not cracked or damaged. If there is any sign of moisture in the module, DO NOT use the
Pro Plus 4.0 until it receives proper service by an Authorized Oceanic Dealer, or the Oceanic factory.
Data Retention
When the battery is removed, settings* and calculations for repetitive dives are retained in volatile memory until a new battery is installed.
*Date will have to be set, Time may require adjustment for the time duration that the battery remains out of the unit.
X
X
X
X
low pressure
depth sensor
water
contacts