Oceanic Proplus 4.0, Руководство по эксплуатации

Страница: 27 / 50

27
PROPLUS 4.0 OPERATING MANUAL
© Pelagic, 2019 Doc. No. 12-5669-r01 (1/18/19)
SET MODE
Set Mode allows you to choose between Norm or Gauge modes of operation.
NOTE: The ProPlus 4.0 will be locked in Gauge mode for 24 hours after surfacing from any Gauge or Violation Dive. Otherwise,
you may switch modes freely while in either Surface Mode.
SEL ADV
next item in
Main Menu
access
Set Mode
SEL ADV
toggle
setting
save setting
Set Mode Lead-in Set Mode
HISTORY
History is a summary of basic data recorded during all Norm and Gauge dives.
SEL ADV
next item in
Main Menu
access
History Data 2
History Data 1
SEL ADV
access
History Data 3
History Data 2
SEL ADV
back to
History Data 1
History Data 3
total #
of dives
total #
of dive
hours
highest altitude
recorded for a
dive
lowest
recorded
water
temperature
deepest
recorded
dive
longest
recorded
dive
SN (SERIAL NUMBER)
Information displayed on the Serial Number screen should be recorded and kept with your sales receipt; it will be required in the event that your
ProPlus 4.0 requires factory service. The ProPlus 4.0 is configured with hidden feature that clears nitrogen and oxygen calculations. This is intended
for facilities using the ProPlus 4.0 for rental or training activities, not for general use by individual divers. The feature is hidden to prevent accidental
use. If you enter the Clear Data screen by accident, you may exit without change by holding the SEL button for 2 seconds.
WARNING: Reset after a dive and subsequent use for a repetitive dive conducted by the same diver could result in serious injury
or death.
SEL ADV
back to Dive
Surf Main
access
Clear Data
Serial Number
serial #
revision #
SEL ADV
to advance
through the
digits
Save the first 2
digits, then the
second 2 digits
Clear Data
code