Oceanic Proplus 4.0, Руководство по эксплуатации

Страница: 29 / 50

29
PROPLUS 4.0 OPERATING MANUAL
© Pelagic, 2019 Doc. No. 12-5669-r01 (1/18/19)
INITIATING A DIVE
With the ProPlus 4.0 in Norm Dive Mode, a dive will commence upon descending to 5 ft (1.5 m) for at least 5 seconds. Below is a diagram to help
you navigate Dive Mode functions. Below is a diagram to help you navigate Norm Dive Mode functions.
Ascent Rate
Tissue Loading
Depth
Gas Time
Remaining
(min)
No Deco
Time
(min)
Gas
Pressure*
Gas #
NO DECOMPRESSION DIVE MAIN
From the Main screen you can see all critical dive parameters. During a dive an audible alarm may sound and the priority of information displayed
may change. This is to indicate a safety recommendation, warning, or alarm. The following information in this chapter demonstrates and describes
an uneventful dive, in terms of safety. Alarms are described in the Complications section of this chapter.
WARNING: Before diving with the ProPlus 4.0 take time to familiarize yourself with both normal and alarm conditions of opera-
tion.
*If gases 2 or 3 are selected,
then SPG (submersible pressure
gauge) will be displayed in
place of pressure and gas time
remaining.
SEL ADV
backlight
ALT 1
ALT 2
ALT 3
( only if nitrox )
DEEP STOP
PREVIEW*
back to Main
ADV
*Only available if Deep Stop is
triggered and active
ALT 1
This screen tells you the maximum depth and elapsed dive time.
ALT 2
This screen tells you the current time of day and ambient temperature.