Oceanic GEO 4.0, Руководство по эксплуатации

Страница: 52 / 66

52
GEO 4.0 OPERATING MANUAL
© Pelagic, 2019 Doc. No. 12-5670-r01 (2/27/18)
ALT 2
This screen displays current time of day, temperature, and elevation.
Watch Default Time
temperature
elevation
(EL2 - EL7, blank if sea level)
COUNTDOWN TIMER (CDT)
The Geo 4.0 allows you to set a CDT time from 0:01 - 59:59 (min:sec). On the surface the CDT must be started and stopped in the CDT Status screen
by selecting ON or OFF. The CDT will run in the background, while on the surface and during dives, until it counts down to 0:00, or it is turned OFF.
When a set CDT time reaches 0:00, the audible will sound. During which time the graphic CDT will be displayed flashing on the Surface or Dive
Main until the audible is silent.
NOTE: Setting the CDT does not start the countdown. You must select ON in the CDT Status screen to start the CDT.
SELECT
ADV
.
LIGHT
MODE
to CDT Status
CDT STATUS LEAD-IN
SELECT
ADV
.
LIGHT
MODE
toggle
setting
toggle
setting
to select
OFF, ON, or SET
CDT STATUS
SELECT
ADV
.
LIGHT
MODE
decrease
value
increase
value
to save
min/sec
min:sec
SET CDT
flashing
CDT ALARM TRIGGERED
(on surface, during audible alarm)
SET ALARMS
Within this submenu you can customize the following Free Mode alarm settings.
SELECT
ADV
.
LIGHT
MODE
to Set EDT
Alarm
SET ALARMS LEAD-IN