Oceanic GEO 4.0, Руководство по эксплуатации

Страница: 37 / 66

37
GEO 4.0 OPERATING MANUAL
© Pelagic, 2019 Doc. No. 12-5670-r01 (2/27/18)
INITIATING A DIVE
With the Geo 4.0 in Dive mode, a dive will commence upon descending to 5 ft (1.5 m) for at least 5 seconds. Below is a diagram to help you navi-
gate Dive mode functions.
SELECT
ADV
.
LIGHT
MODE
ALT 1
ALT 2
(nitrox only)
back to Main
Backlight
ADV
.
NO DECOMPRESSION NORM DIVE MAIN
to Deep Stop
Preview
NO DECOMPRESSION DIVE MAIN
From the Main screen you can see all critical dive parameters. During a dive an audible alarm may sound and the priority of information displayed
may change. This is to indicate a safety recommendation, warning, or alarm. The following information in this chapter demonstrates and describes
an uneventful dive, in terms of safety. Alarms are described in the Complications section of this chapter.
NOTE: Before diving with the Geo 4.0 take time to familiarize yourself with both normal and alarm conditions of operation.
depth
deep stop if triggered
Dive Time Remaining
0 - 599 min, all times greater than 599 display as 599
(NDC min or O2 min depending on which is the limiting factor)
Tissue Loading
Bar Graph
elapsed dive time
0 - 999 min
ascent rate
bar graph
Gas #
DIVE MAIN
max depth
DIVE ALT 1
This screen simply tells you the current time of day and ambient temperature.
DIVE ALT 2
The ALT 2 screen displays information pertaining to nitrox; it is bypassed if the Geo 4.0 is set for air.
% O
2
saturation
0 - 100
current
PO
2
value
FO
2
setting