Oceanic GEO 4.0, Руководство по эксплуатации

Страница: 41 / 66

41
GEO 4.0 OPERATING MANUAL
© Pelagic, 2019 Doc. No. 12-5670-r01 (2/27/18)
DELAYED VIOLATION 1 (DV 1)
If you remain shallower than a Decompression Stop Depth for more than 5 minutes, operation will enter DV1* which is a continuation of CV with
penalty time still being added. Again, the audible alarm will sound and the full Tissue Loading Bar Graph will flash until it is silenced. ALT screens are
accessed and appear similar to Decompression ALT screens.
*The difference is that 5 minutes after surfacing from the dive, operation will now enter Violation Gauge Mode.
• The down arrow continues to flash until descending below the required Stop Depth, then the full stop graphic will be on solid.
• If the DV1 status is ignored, the Geo 4.0 will enter DV1 Surface mode for 5 minutes upon surfacing from the dive. The down arrow, Decompres-
sion Stop depth/time, and Surface Time will be displayed. After 5 minutes on the surface in DV1 mode, the unit will enter VGM (Violation Gauge
Mode).
DV1 DIVE MAIN
time required at
missed stop (min)
down arrow flashing
Tissue Loading
Bar Graph
flashing
missed
stop
depth
DV1 < 5 MIN ON SURFACE
Surface Time
(hour:min)
DELAYED VIOLATION 2 (DV 2)
If the calculated Decompression obligation requires a Stop Depth between 60 ft (18 m) and 70 ft (21 m), operation will enter DV2.
The audible alarm will sound and the alarm LED will flash. The full Tissue Loading Bar Graph will flash until the audible is silenced.
• The up arrow flashes if 10ft (3 m) deeper than the required Stop Depth.
• Once within 10 ft (3 m) of and below the required Stop Depth, the full stop graphic (opposing arrows with stop bar) will be displayed solid.
Decompression
Stop depth
60 -70 ft
(18 - 21 m)
DELAYED VIOLATION 3 (DV 3)
If you descend deeper than the maximum functional depth*, the audible alarm will sound, the alarm LED will flash, and the up arrow will flash. Addi -
tionally, Current Depth will only indicate dashes signifying that you are too deep.
* The maximum functional depth (330 ft / 100 m) is the depth at which the Geo 4.0 can properly perform calculations or provide accurate display
information.
Upon ascending above the maximum functional depth, current depth will be restored. However, the log for that dive will display dashes for max
depth.
flashing