Oceanic GEO 4.0, Руководство по эксплуатации

Страница: 33 / 66

33
GEO 4.0 OPERATING MANUAL
© Pelagic, 2019 Doc. No. 12-5670-r01 (2/27/18)
6. CONSERVATIVE FACTOR
The Conservative factor tables feature can be set ON or OFF.
SELECT
ADV
.
LIGHT
MODE
toggle setting
to select
OFF or ON
SET CONSERVATIVE FACTOR
7. BLUETOOTH (BLUETOOTH COMMUNICATION)
Within this screen the Bluetooth may be turned ON or OFF. When ON is selected, dashes will display sequentially at the
top of the screen indicating that Bluetooth is initiating. When Bluetooth is turned on it will operate in sniffing mode (search -
ing for compatible devices) while on the surface and the Geo 4.0 is not in Standby Mode. Communication with your Geo
4.0 must be initiated with your mobile device using D software.
NOTE: When Bluetooth is ON the Bluetooth icon will be displayed when on the surface and in Norm,
Gauge, or Free Mode but not during Watch or Standby Mode. Bluetooth is temporarily deactivated when
the Geo 4.0 enters Watch Mode, Standby Mode, or a dive is started. The Geo 4.0 returns to "sniffing"
mode when the Geo 4.0 returns to Surface Mode after a dive or a button is pushed to wake the computer
from Standby Mode on the surface. You will notice the Bluetooth icon flashing as the Bluetooth function is
reinitiating.
SELECT
ADV
.
LIGHT
MODE
toggle setting
to select
OFF or ON
SET BLUETOOTH
8. GLO (BACKLIGHT) DURATION
This setting is the duration the backlight stays on after releasing the buttons.
SELECT
ADV
.
LIGHT
MODE
decrease
value
increase
value
to select
0, 5, or 10 sec
SET GLO DURATION
GLO = backlight