Oceanic GEO 4.0, Руководство по эксплуатации

Страница: 27 / 66

27
GEO 4.0 OPERATING MANUAL
© Pelagic, 2019 Doc. No. 12-5670-r01 (2/27/18)
LOG
The log stores Information from the latest 24 Dive and/or Gauge mode dives for viewing.
• If no dives are recorded, the message NONE YET will be displayed.
• After exceeding 24 dives, the most recent dive is stored while the oldest is deleted.
• Dives are numbered from 1 to 24 starting each time a dive is activated in either Norm (or Gauge) mode. After the post dive 24 hour period has
elapsed and the unit shuts off, the first dive of the next activation period will be recorded as dive #1.
• I n the event that dive time (DIVE MIN) exceeds 999 min, the data at the 999 interval is recorded in the Log upon surfacing of the unit.
• The message GAU (Gauge) or VIO (violation) will display, in the lower left, if applicable on the Log Data 1.
NOTE: New data will automatically overwrite the oldest data in memory when the memory becomes full. If you do not remem-
ber to log or download your dives, they will be lost when the memory overwrites. See the Download section of this manual for
instructions on downloading dives.
lowest
temperature
recorded elevation of
dive location,
SEA (or EL 2 - EL7)
SELECT
ADV
.
LIGHT
MODE
to Log Preview
LOG LEAD-IN LOG PREVIEW
SELECT
ADV
.
LIGHT
MODE
to Log Data 1
step forward
through log
records
step backward
through log
records
date of dive
dive #
dive
start time
SELECT
ADV
.
LIGHT
MODE
LOG DATA 1
to Log Data 2
max tissue loading,
blank if GAUGE
dive
max
ascent rate
Surface Time
hr:min
max depth
elapsed dive time (min)
SELECT
ADV
.
LIGHT
MODE
LOG DATA 2
to Log Data 3
or back to
Log Preview
SELECT
ADV
.
LIGHT
MODE
LOG DATA 3
back to
Log Preview
highest PO
2
reached during
the dive
% O
2
Saturation
at end of dive, - - if the
dive entered
Violation Gauge
Mode
gas mix
FO
2
(% O
2
)
NOTE: Log Data 3 only displays for nitrox dives; it is bypassed if the dive was an air dive.