Oceanic GEO 4.0, Руководство по эксплуатации

Страница: 48 / 66

48
GEO 4.0 OPERATING MANUAL
© Pelagic, 2019 Doc. No. 12-5670-r01 (2/27/18)
RUN TIMER
The Gauge Mode allows for a Run Timer to be added to the Gauge Dive Main screen.
NOTE: Once the Run Timer is added and started, it can be removed and continue to run in the background until it is again
added. Though it can only be started and stopped while it is being displayed.
SELECT
ADV
.
LIGHT
MODE
ADD RUN TIMER
SELECT
ADV
.
LIGHT
MODE
display
run timer
RUN TIMER
remove
run timer
start/stop
timer, if on
main
Run Timer
hr:min
reset timer,
if on
main and
stopped
DELAYED VIOLATION 3 (DV3)
If you descend deeper than the maximum functional depth*, the audible alarm will sound and the alarm LED will flash. At the same time, the up ar -
row will flash and depth will only indicate dashes signifying that you are too deep. The max depth will also be represented by dashes.
* The maximum functional depth (330 ft / 100 m) is the depth at which the Geo 4.0 can properly perform calculations or provide accurate display
information.
Upon ascending above the maximum functional depth, current depth will be restored, however, max depth will continue to be displayed as dashes
for the remainder of that dive. The Log for that dive will also display dashes for max depth.
NOTE: Once the Run Timer is added and started, it can be removed and continue to run in the background until it is again
added. Though it can only be started and stopped while it is being displayed.
flashing