Oceanic GEO 4.0, Руководство по эксплуатации

Страница: 14 / 66

14
GEO 4.0 OPERATING MANUAL
© Pelagic, 2019 Doc. No. 12-5670-r01 (2/27/18)
SHOW DUAL TIME
This setting allows you to choose whether or not to show dual time zones, both HOME and AWAY, on the Watch Main screen. If you select yes, the
secondary time reading will display at the top on the Watch Main screen.
NOTE: If the Set Dual Time in the Set Time menu is set to OFF (00 hour difference), the secondary time will not be displayed on
the Watch Main screen.
SELECT
ADV
.
LIGHT
MODE
SHOW DUAL TIME LEAD-IN
access
show dual
SELECT
ADV
.
LIGHT
MODE
- : - - if no secondary
time set
or OFF
SHOW DUAL OFF/ON
save setting
toggle setting
CDT (COUNTDOWN TIMER)
This feature allows you to program a countdown timer with audible alarm. The initial options are OFF or SET. To set the timer you must save an hour
value then the minute value. You may choose a value between 0:01 and 23:59. Once a countdown time is set, the ON selection becomes available
in Set CDT screen . If On is selected, the CDT will run in the background until it counts down to 0:00, or it is set OFF. When a set Countdown time
reaches 0:00, the Audible Alarm will sound. During which time the graphic CDT will flash on the Watch Main screen.
NOTE: Switching to Norm, Gauge, Free modes, or initiating a dive will terminate the CDT and revert the CDT setting to OFF.
SELECT
ADV
.
LIGHT
MODE
CDT LEAD-IN
access
CDT status
SELECT
ADV
.
LIGHT
MODE
OFF, ON, or SET
CDT STATUS
to select toggle setting
toggle setting
SELECT
ADV
.
LIGHT
MODE
SET CDT
decrease
value
increase
value
to save hour/min
hour:min
WATCH MAIN
(during CDT Alarm)
flashing