Oceanic Safety Systems PROGRAMMABLE SUBMERSIBLE LIFE VEST Скачать руководство пользователя страница 4

44

Programmable, Submersible Live Vest User Manual  copyright Oceanic Safety Systems LLC., 2014

 

You are responsible for ensuring that the battery in your PSLV is adequately charged before

each use

. The Warranty Period is the two (2) year period commencing on the date of shipment of the

PSLV .  In the event that the inflation unit battery fails, OSS’s sole liability and obligation to you, and your
sole right and remedy against OSS, is for OSS, at its option, to replace the battery according to the
prorated basis below. The condition of the battery for purposes of prorating replacement costs is to be
determined solely by OSS.

Prorated values for the Lithium Ion battery:

            (i)  Like new and less than 1 year old—OSS  pays 100%, customer pays 0%.
            (ii)  Slightly used and less than 2 years old—OSS  pays 50%, customer pays 50%.
            (iiI)  More than 2 years old— customer pays 100% of replacement cost.

Out-of-Warranty Battery Replacement

The PSLV battery can only be replaced or repaired by OSS. OSS offers a battery replacement service
for a fee, which will be available for a period of a minimum of (10) years from the original date of pur-
chase of the PSLV.

 

1 c. V Vest soft parts:

 

2-year limited Warranty and Prorated values for replacement

The PSLV soft parts, defined as actuator pouch,  straps and inflation bladder are the least durable and
the most vulnerable parts subject to potential user abuse. Therefore, the warranty period is less than
other PSLV components. To extend the utility of the soft parts, be sure to carefully observe handling and
cleaning of your PSLV components. These parts will be replaced on a pro-rated basis as determined by
the date of shipment of the PSLV and the condition of the parts as determined solely by OSS.

Pro-rated value for Vest Soft Parts:

 (i)  Like new and less than 1 year old—OSS  pays 100%, customer pays 0%.
(ii)  Slightly used and less than 2 years old—OSS  pays 50%, customer pays 50%.

            (iii)  Very used and less than 2 years old—OSS  pays 25%, customer pays 75%.
            (iv)  After 2 years or when worn out—OSS  pays 0%, customer pays 100%.

2. Warranty Procedure

 If you believe you have a warranty claim with respect to the PSLV , please consult the on-line help
resources available at www.oceanicss.com or the PSLV User Manual before submitting your warranty
claim and seeking warranty service. OSS will perform its warranty obligations. You are responsible for
prepaying all shipping costs (including insurance) incurred when sending the PSLV to OSS and for
returning your repaired or replacement PSLV to you.

3. Transfer of Your PSLV

You agree not to sell, give, or lend your PSLV , or otherwise permit any person to use your PSLV , unless
that person has agreed to this User Agreement and Warranty, and read the User Manual. You may sell,
give, or lend your PSLV to another person, provided that you give that person this Agreement at the same
time and notify them that by using the PSLV, they agree to be bound by this User Agreement and
Warranty. You also agree to give any person to whom you give or sell your PSLV , simultaneously with the
PSLV , proof of your date of purchase of your PSLV , without which they will not be entitled to submit a
claim under the Warranty. It is important to have the purchaser register their ownership with OSS so that
OSS may communicate directly with them regarding offers, upgrades and safety information regarding
the PSLV and so that we can record the PSLV serial numbers for the current owner. This information is
important for communication for such things as product updates, notices or for recalls.

Содержание PROGRAMMABLE SUBMERSIBLE LIFE VEST






































Отзывы: