10
10
Programmable, Submersible Live Vest User Manual copyright Oceanic Safety Systems LLC., 2014
CHARGING THE PSLV BATTERY:
The PSLV is equipped with a powerful battery capable of driving
the unit for more than 30, 8-hour days. The level-of-battery-charge screen alternates between “Batt” and
the charge percentage. To charge the unit, use a quarter to remove the charge port screw. Connect the
battery charger provided with this unit where the battery charger green light turns red. A fully discharged
battery will take 4- 8-hours to charge. When the battery is fully charged, the light on the wall charger will
change from red to green. The charger will shut off automatically when the battery is full. Be sure to
replace the charge plug or the unit will flood. Take care not to strip the threads. Removing the charger
from the wall socket, but leaving it attached to the actuator drains the battery.
DO
•
Store battery with a charge level between 20% and 80%
•
Partially charge the battery every 2 to 3 months.
DO NOT
•
Continually charge the battery to 100% when not being used.
•
Use the PSLV with a battery charge less than 50% in freezing conditions.
•
Allow the battery to remain in a fully-discharged state.
•
Do not store the battery in very high or low ambient temperatures.
REMOVE THE CHARGE
PORT PLUG WITH A
QUARTER TO PREVENT
FLOODING, BE SURE TO
REPLACE THE PLUG.
CONNECT THE CHARGER AND LOOK FOR THE CHARGING LIGHT
(RED) ON THE CHARGER. IT WILL TURN GREEN WHEN FULLY
CHARGED. (Unfortunately, a few have forgotten to replace their
charger plug and ruined their unit when it flooded—DON’T FORGET!)
WRAP THE
CHARGER PLUG
CORD AS A
REMINDER
