manualshive.com logo in svg

Oceanic Safety Systems PROGRAMMABLE SUBMERSIBLE LIFE VEST, Руководство пользователя

Поделиться
Скачать
Oceanic Safety Systems PROGRAMMABLE SUBMERSIBLE LIFE VEST Скачать руководство пользователя страница 35

35

35

Programmable, Submersible Live Vest User Manual  copyright Oceanic Safety Systems LLC., 2014

Shipping and handling charges to locations outside of the continental US will vary. Please advise how
your area is best served.

Some components may be replaced with another component with a different serial number. The
replacement component will be completely remanufactured and tested like new. In some cases, we will
make the replacement with new components.  Estimates will be provided at no-charge when necessary
or requested. In the United States, if you decline our service estimate, or if the product is not serviceable,
we will return your PSLV  or component ground return freight at no charge.

When shipping, we recommend you use an insured, traceable shipping method. We will not be
responsible for a non-traceable shipment, or if damage results from poor packaging. We will decline any
shipments sent freight-collect.

This manual is copyrighted, all rights reserved. It may not, in whole or in part, be copied, photocopied,
reproduced, translated or reduced to any electronic medium or machine-readable form without prior
consent in writing from OSS. It may not be distributed through the Internet or computer bulletin board
systems without prior consent in writing from OSS. ©2014,  Oceanic Safety Systems LLC.

Содержание PROGRAMMABLE SUBMERSIBLE LIFE VEST






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды