MNL-1024 Rev A
19
Electrical Pinout
The Flame-NIR+ features a 40-pin accessory connector, located on the front of the unit as shown:
DD4 Accessory Connector Pinout Diagram
When facing the 40-pin Accessory Connector on the front of the vertical wall of the Flame-NIR, pin number 1 is on the right.
Listed below is the pin description for the Flame-NIR+ Accessory Connector located on the front vertical wall of the unit. The Flame-
NIR+ will include a JAE DD4 receptacle, part number DD4RA40JA1. Most accessories that plug into the Flame-NIR+ will include a JAE
DD4 plug, part number DD4PA40MA1. There is also a vertical connector, JAE part number DD4BA40WA1.
Pin # Function
Voltage
Level
Description
1
Ground
N/A
Ground
2
Trigger
5 or 3.3 V
The TTL trigger signal.
3
Continuous
Strobe
5 V
TTL output signal used to pulse a strobe that is divided down from the Master Clock signal.
4
Single Strobe 5 V
TTL output pulse used as a strobe signal, which has a programmable delay relative to the beginning
of the spectrometer integration period.
Содержание FLAME-NIR+
Страница 2: ......
Страница 21: ...MNL 1024 Rev A 18 Mechanical Diagram Dimensions in inches mm...
