Oce TDS400, Краткое руководство пользователя

Страница: 49 / 95

Maintenance and Supplies 49
How to cut the paper to get a straight leading strip
If the paper does not have a straight leading strip, you can cut the strip off at
right angles from the roll.
▼
Cut the paper from roll 1 or roll 2
1
Open the drawer.
2
Feed the paper manually until it is approximately 5 cm above the top drawer.
3
Close the paper drawer.
4
Press ‘Extra’ to enter the main menu.
5
Select the ‘Media settings’ item using the or key.
6
Press ‘next/select’ to enter the ‘Media settings’ menu.
7
Select ‘Cut media’ using the or key.
8
Press ‘next/select’ to cut the paper.
9
Open the paper drawer.
10
Remove the cut of material.
11
Pull the material back until you see it correctly installed (see Figure 15 on
page 46).
12
Close the drawer.
13
Press the ‘on-line’ key.
How to program media settings
If you insert a new roll with another material or with a different width, set the
new roll specifications.
The width of the material
Materials Size
A0 841 mm
A1 594 mm
A2 420 mm
A3 297 mm
E 86.36 cm
D 55.88 cm
C 43.18 cm
B 27.94 cm
E+ 91.44 cm
D+ 60.96 cm
Note:
The default is 36 inch