Oce TDS400, Краткое руководство пользователя

Страница: 46 / 95

46 Océ TDS400 Quick Reference Manual
[14] Change the position of the roll
8
Feed the material between the input guide platen against the rollers.
9
Turn the rollers until you can see the material (see Figure 15). Also refer to the
label inside of the drawer.
[15] Feed the material
10
If you insert a roll with another material, use the printer operator panel to set
the correct material.
If you insert a roll with a different width, use the printer operator panel to set
the correct width. See for complete information ‘How to program media
settings’ on page 49.
See ‘How to cut the paper to get a straight leading strip’ on page 49 to cut the
paper to get a straight leading strip, or continue with the next step.
11
Close the drawer.
12
Press the ‘on-line’ key.