Oce TDS400, Краткое руководство пользователя

Страница: 35 / 95

Océ Scan Logic® 35
The scan settings
Press the ‘Extra’ key on the scanner operator panel to access the settings for
scan-to-file (see Figure 7 on page 32). The following options are available in
the ‘File’ menu:
You can store your scan either in the temporary storage on the controller or you
can store it on a network destination. You can define a maximum of six
destinations in the Océ Scan Manager application. You can select one of these
destinations on the scanner operator panel.
Check print
A Check print is a print from the scanned original. You can turn
the check print on or off.
File resolution
The Océ TDS400 scan-to-file option can scan three
resolutions: 200, 300 or 400 dots per inch (DPI). The higher the resolution, the
better the image quality. Higher resolution also causes larger file size.
File format
To define format of the scanned files, select between TIFF (Tagged
Image File Format), CALS-I (Continuous Acquisition and Life Cycle support),
or PDF (Portable Document Format). PDF can only be defined when
PostScript 3® is enabled in the Océ Settings Editor.
Optimize size
Select this option to decrease the size of the file and get good
quality.
Set the scan size In the ‘Original’ menu.