Oce TDS400, Краткое руководство пользователя

Страница: 26 / 95

26 Océ TDS400 Quick Reference Manual
Copying with the Océ TDS400
Connect the scanner to the controller to copy.
▼
Making a copy
1
Insert the original face down.
2
Align the original right along the original guideline on the scanner feed table.
You can see the line (see Figure 4).
The scanner moves the original approximately 1 cm to a defined position.
3
Press the ‘start’ key to copy.
The printer prints the copy.
[4] Insert the original
▼
Stop a job
1
Press the Cancel key.
Movement of the original stops.
2
The scanner display shows the message ‘Remove original’, ‘Press cancel’.
3
Open the scanner cover and remove the original (see Figure 24).
4
Close the cover.
Press the Cancel key. The message disappears on the scanner display.