Oce TDS400, Краткое руководство пользователя

Страница: 29 / 95

Using the Océ TDS400 to copy 29
Manual feed
▼
Copy on pre-cut sheets
1
Press the ‘media’ key on the scanner panel to select ‘manual feed’. The
indicator lights up.
Note:
The minimum length of the print material must be 420 mm.
2
Enter the number of copies.
3
Select width measurement of the original
4
Feed the original.
5
Press the ‘start’ key .
6
Enter the type of the copy material on the printer operator panel.
7
Take your sheet of copy material to the side of the printer that contains the
cassette tray (see Figure 5).
8
Align the copy material with your hands to the format indication and the label
on the manual feed table.
9
Move the copy material forward in the cut of the roller. A paper bulge must
appear over the full width of the page.
To copy sets
Use the input mode ‘set’ to copy sets of originals. The originals will be scanned
sheet by sheet and the image information will be stored in memory. When you
press the start key to close the set the printer prints the output.
▼
How to copy sets
1
Press the ‘input’ key to select the input mode ‘set’.
2
Insert an original.
3
Add the originals to the set and press the Start key.
After the last scan of the set, remove the original and press the Start key to
close the set.