Oce PRISMAproduction, Справочное руководство

Страница: 72 / 139

SPS Start-up Procedures
U20944-J-Z247-6-7600
SPS/MVS related topics
For further information on the following topics (see SPS/MVS Administration Guide,
sections are named as the topics listed below).
SPS Started Task Authorization
SPS Data Set Authorization
Sample Procedure for Defining SPS to RACF
Execution Data Set Allocations
Trace
SPS provides the capability of collecting extensive trace information on processing errors.
Two trace data sets may be allocated for each printer for collecting this information. The
allocation of these data sets for each printer in a start-up procedure, although optional, is
highly recommended. GTF can be used instead of the user trace data sets. However,
GTF often loses many trace records depending on the activity of the system. The user
trace facility provides a wrap around trace table on disk that does not lose trace records.
The data may also be directed to tape. SPS defaults, as delivered, generate a
comprehensive trace to disk.
The use of trace data collection to disk or tape after installation checkout of the SPS
product is only required when a problem has been detected and a trace needs to be
generated. This will generally be done at the request of a service representative. The
installation should therefore specify the start-up parameter TRACEFILE(NO) and
TRACELEV(0) in the setup member for the printer after SPS is running satisfactorily
(please see
PP/ROUTER Administrator's Guide for trace parameter information).