Oce PRISMAproduction Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 139

background image

Installation and Customization

U20944-J-Z247-6-7600

multiple SPS driven printers are supported, multiple copies of SPS will be loaded into
virtual storage, when more than one start-up procedure is used. Each of these copies will
be backed by different real storage, if the normal installation procedure is followed
(STEPLIB or LINKLIB installation) and one start-up procedure is defined for each printer.
This duplication can be avoided by directing the link-edits of re-entrant SPS modules to
LPALIB (please see "Adjust JCLIN for LPALIB" ) for how to perform this function.

When the SPS re-entrant modules are moved or copied to LPALIB there will be no
additional virtual or real storage required for multiple copies due to multiple start-up
procedures.

SPS Execution Data Sets

The execution data sets required by SPS depend on the printers installed and the
execution options chosen. SPS requires start-up procedure oriented and printer oriented
data sets. Start-up procedure data sets have one allocation of each type in the procedure.
Printer data sets have one allocation of each type for each printer.

Every procedure requires a message library, a parameter library, a ROUTER control table
and may need a steplib and dump data set. The libraries and ROUTER control table may
be shared between procedures, but the dump data set must be unique. The trace data
sets must be unique for each printer.

User trace data sets are recommended for each printer. However, if the data sets are not
present, the trace function will be suppressed and SPS will run normally. An abnormal
termination dump data set is not required. However if the data set is provided, abnormal
termination dumps will be written to this data set instead of SYSOUT.

DDnames

SPS allocates the data sets defined in the start-up procedure by ddname. The ddnames
of the trace files must be of the form SPS1nnnn and SPS2nnnn, where

nnnn

is the JES

printer number expanded to 4 digits (for PRT4 would be SPS10004 and SPS20004).

«
...
38
39
40
41
42
...
»

Содержание PRISMAproduction












































































































































Отзывы:

Нет отзывов

Похожие инструкции для PRISMAproduction

Verizon DSL-2750B

Бренд: D-Link Страницы: 2

Бренд: D-Link Страницы: 4

IES615-2D Series

Бренд: 3onedata Страницы: 3

Бренд: 3One data Страницы: 5

Бренд: 3onedata Страницы: 33

Бренд: F-SECURE Страницы: 19

Бренд: ICP DAS USA Страницы: 14

Бренд: ICP DAS USA Страницы: 25

Бренд: ICP DAS USA Страницы: 15

Бренд: ICP Страницы: 14

TOWERCHRON DP72

Бренд: Grasslin Страницы: 2

InvenSense RoboKit1

Бренд: TDK Страницы: 13

DataPlot CB1224

Бренд: B-G Instruments Страницы: 4

Бренд: Rajant Corporation Страницы: 40

Бренд: TP-Link Страницы: 57

Бренд: XAVI Technologies Corp. Страницы: 63

ipRocketLink IAD 3086

Бренд: Patton electronics Страницы: 12

8-Port 10/100Mbps Fast Ethernet Switch

Бренд: Amer.com Страницы: 14

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды