Oce PP18C, Руководство по эксплуатации

Страница: 94 / 150

Using the Operator Panel
2-68 ADVANCED OPERATION GUIDE
the orientation of the printed page. You can use long-edge or short-edge
binding with either landscape or portrait printing.
Depending on the binding type and print orientation, the duplexer provides
four types of binding. These are: (1) portrait, long-edge, (2) portrait, short
edge, (3) landscape, long-edge, and (4) landscape, short-edge. The figure
below shows these binding methods.
This procedure can only be performed when the optional duplexer is
installed.
1 Press [MENU] .
2 Press
U
or
V
repeatedly until
Paper
Handling >
appears.
3 Press
Z
.
4 Press
U
or
V
repeatedly until
>Duplex
Mode
appears.
5 To activate duplex printing, press [OK]
([ENTER]) . A blinking question mark (
?
)
appears.
6 Press
U
or
V
to display the desired binding mode. The message display
toggles through the following:
None
(default)
Short edge bind
Long edge bind
7
When the desired binding mode is displayed, press [OK] ([ENTER]) . The
binding mode is set.
8
To exit the menu selection, press [MENU] .
(1)
(3)
(2)
(4)
Portrait,
long-edge
Landscape,
long-edge
Portrait,
short-edge
Landscape,
short-edge
Paper Handling >
>Duplex Mode
None
>Duplex Mode
?None