Oce PP18C, Руководство по эксплуатации

Страница: 53 / 150

Using the Operator Panel
ADVANCED OPERATION GUIDE 2-27
9 When the desired size is displayed, press [OK] ([ENTER]) .
10 Press [MENU] . The display returns to
Ready
.
Maximum Space Assigned to Permanent Code Jobs
This changes the hard disk space that holds permanent code jobs. You
can change the maximum space from 0 to 9999 (megabytes). The actual
maximum size depends on the size of free hard disk space. The default
size is 1/6 of the total hard disk space, rounded off in units of 50MB. For
example, if the total hard disk space is 10GB, the default size is 1550MB.
1 Press [MENU] .
2 Press
U
or
V
and select
e-MPS >
.
3 Press
Z
.
4 Press
U
or
V
and select
>e-MPS
Configuration >
.
5 Press
Z
.
6 Press
U
or
V
and select
>>Perm. Code
JOB Size
.
7 Press [OK] ([ENTER]) , the message
display shows a blinking cursor (
_
).
8
Press
U
or
V
to increase or decrease, respectively, the value at the
blinking cursor. Use
Z
and
Y
to move the cursor right and left.
9
When the desired size is displayed, press [OK] ([ENTER]) .
10 Press [MENU] and the display returns to
Ready
.
Maximum Space Assigned to Virtual Mailboxes (VMB)
This changes the hard disk space for virtual mailboxes. You can change
the maximum space from 0 to 9999 (megabytes). The actual maximum
size depends on the size of free hard disk space. The default size is 1/6 of
the total hard disk space, rounded off in units of 50MB. For example, if the
total hard disk space is 10GB, the default size is 1550MB.
e-MPS >
>e-MPS >
Configuration
>>Perm. Code JOB
Size 1550MB
>>Perm. Code JOB
Size 1550MB